Author: GullCode

Portapack firmware with Search App and updated Freqman files (based on latest next )

GullCode
  • I’ve build an up to date firmware with the last updates from next and the last version from search app and freqman enhancements.
  • The Search app is in the ‘receive’ menu
  • The documentation is here : https://github.com/GullCode/portapack-mayhem/wiki/Search
  • -Freqman now do understand freq files with that format:
    f=468000000 f=468000000,d=Single Freq f=468000000,m=AM,d=Single Freq AM f=468000000,m=NFM,d=Single Freq NFM f=468000000,m=WFM,d=Single Freq WFM f=468000000,m=AM,b=DSB,d=Single Freq AM DSB f=468000000,m=AM,b=USB,d=Single Freq AM USB f=468000000,m=AM,b=LSB,d=Single Freq AM LSB a=87000000,b=110000000 a=87000000,b=110000000,m=AM,s=100KHz,d=AM radio search a=87000000,b=110000000,m=AM,b=DSB,s=250KHz,d=AM radio search LSB a=87000000,b=110000000,m=WFM,b=16k,s=50KHz,d=WFM radio search s=50KHz r=430150000,t=430550000 r=430150000,t=430550000,d=HAM radio r=430150000,t=430550000,m=AM,b=DSB,d=HAM radio
  • The freqman GUI have note been improved and may show partial results on new formatted lines
  • Description of the fields:
    f=freq for one frequency or a=start_frequency,b=end_frequency for a range
    m=modulation
    b=bandwidth
    s=step
    d=description
  • All fields except ‘f=freq’ or ‘a=freqA,b=freqB’ are mandatory. If nothing specified actual value is used.
  • As a reminder :
    -Most of the time if the Search app is not working as you expected it’s coming from a SDCARD problem.
    -You need a SDCARD for the Search app to save settings between runs and between settings menu / main gui, and you need a SEARCH folder at the root of it.
    -Don’t forget to check that by default the ‘input: load’ fields in ‘search app -> params -> more ‘ are all checked.
    -You HAVE to click save in ordre to save the settings.
portapack-h1_h2-mayhem.binDownload

GitLab: WARNING: gl-sast-report.json: no matching files

GullCode

When enabling SAST in a gitlab project you can have that kind of error at the tests part:

The yaml provided is not containing the needed part:

artifacts:
   name: sast
   paths:
     - gl-sast-report.json
   reports:
     sast: gl-sast-report.json
   when: always

Source:

https://forum.gitlab.com/t/uploading-artifacts-warning-gl-sast-report-json-no-matching-files-error-no-files-to-upload/60887/5

https://gitlab.com/gitlab-org/gitlab/-/issues/345696#note_737150614

Compare two json in shell

GullCode

I did it using the JQ command line tool from https://stedolan.github.io/jq/

Exemple: list all json files from current directory and print the difference with updated jsons from updated/ directory

for user in  `ls updated-users`
do
    # print file name
    echo $user
    # simple 
    diff <(jq -S . users/$user) <(jq -S . updated-users/$user)
    # or full on one side and the diff on the other side
    # diff -y --left-column <(jq -S . users/$user) <(jq -S . updated-users/$user)
    # or full on one side and the diff on the other side, colored
    # diff -y --left-column --color  <(jq -S . users/$user) <(jq -S . updated-users/$user)
done

#shell #diff #json #script

Khelda II [KrampusHack 2021] Game Jam

GullCode

I made a Zelda II alike world with a big map on top view and some dungeons in side view. Permanent world, only the monsters are reset between dungeons / starts.

The limit was way overdue before I could do all I wanted so I’m linking both version here, the entry for the compo and the updated / finalised one.

Compo rules: https://tins.amarillion.org/krampu21/rules/

Tins log : https://tins.amarillion.org/krampu21/log/entrant/4277

git repo: https://framagit.org/GullRaDriel/krampushack2021-kheldaii

Click here for full pack with datas, sources and binaries

Screens:

Map Mode
Dungeon Mode

Gameplay demo : 

Khelda II gameplay demo

=============================================

How to play:

  • You are Kwink. You have to save princess Khelda which is kept prisonner by an Ogre
  • You directly start on the main map. Move around and kill some simple monsters to gain a bit of XP/Life before trying yourself at the dungeons.
  • Each dungeons is guarded by a lot of mobs. Killing them is up to you. Leveling up before being traped in a dungeon is recommended
  • Find all the 3 key fragments before going onto the last dungeon. Deliver princess Khelda by defeating the last mob

Keys:

  • Esc: quit
  • Arrow keys: move, go up/down or jump/crouch
  • CTRL/LeftMouseButton: attack
  • F1 -> F4t: change weapon (Wood stick, sword, magic bow, magic wand)
  • Key PAD PLUS: shield potion
  • Key PAD ENTER: health potion

Items to be collected:

  • shield (passive, always equiped once found)
  • sword of Khelda
  • magic ice wand
  • infinite arrow bow
  • health potion
  • shield potion

Obtain: the kiss of the princess one the Ogre is dead !

Tips:

  • Leveling up a bit on easy monsters before trying yourself to a dungeon
  • Wandering around and use the map find the sword, the magic wand, the arrow, the shield
  • Loot a bit of potions before entering the last dungeon

==============================================

Options:

  • configurable log level, example: ./KheldaII.exe -V DEBUG
  • cheat: editable player_state.json after first execution

==============================================

How to build: need gcc on linux and gcc + msys / cygwin on windows

mkdir -p KheldaII
mkdir -p KheldaII/LIB
mkdir -p KheldaII/Src/
cd KheldaII/LIB
git clone https://framagit.org/GullRaDriel/nilorea-library.git .
cd ../Src/
git clone https://framagit.org/GullRaDriel/krampushack2021-kheldaii.git
cd https://framagit.org/GullRaDriel/krampushack2021-kheldaii.git
make

Night at L’Observatoire des Baronnies Provencales

GullCode

I had the chance to have a night at a space observatory in France. And luckily, there was not that much clouds. Here are the few photos of the site, the equipment, and a few last I made with their mounts.

The Team who was guiding us during the night was very kind and they drove us into the cosmos late in the night.
Not only they were good at explaining, they were also trying their best to make the visitors think by themselves before giving the correct answer.

An experience I recommend.

Their blog
Their website

L’Observatoire des Baronnies Provençales:

L’Observatoire des Baronnies Provençales

Wide night shots around the observatory:

Wide night shots around the observatory

EZScope Unistellar shots:

  • M96
  • M82
  • M65
  • M51
  • M51
  • Dual Stars
  • M13
  • Vega
  • M57
  • M13
  • M57
  • M51
  • M51
  • M65
EZScope Unistellar shots

GIT and BitBucket

GullCode

Cloning a git repository from BitBucket can fail producing that kind of logs:

Clonage dans '.'...
remote: Counting objects: 7008, done.
remote: Compressing objects: 100% (5921/5921), done.
error: échec RPC ; curl 56 GnuTLS recv error (-110): La connexion TLS n’a pas été terminée correctement.
fetch-pack: unexpected disconnect while reading sideband packet
fatal: fin de fichier prématurée
fatal: échec de index-pack

Working solution was to force IPv4 with -4 option, like in the following example:

git clone -4 https://giturl.com/repo.git .